Clockaudio CRM 100N-RF Microfon Omnidirectional

Clockaudio CRM 100N-RF

Microfon condenser omnidirectional, se monteaza in masa si contine un mecanism ce permite ascunderea lui, fara demontare.

Boundary layer through table Omni-Directional condenser microphone. Contains inbuilt mechanism that will allow the microphone to disappear without having to physically remove it from the table.

• Easy to install 
• Low profile at surface level 
• Unique ability to lock capsule away from sight when not in use 
• Designed for remote switching 
• Robust brass construction
• Omnidirectional polar pattern
• Built-in RF filter 
• Balanced output 
• Phantom power module supplied
• Supplied with 2m (6.6 ft) 2 core + screen cable
• Satin Nickel finish

Dimensions Above Table:15.00mm (0.59") Diameter:36.00mm (1.42") Below Table:111.00mm (4.37") Diameter:30.00mm (1.18")
Application Designed for simple installion with professional sound response. For use in conferencing or security situations.
Type Condenser (back electret)
Polar Pattern Omnidirectional
Frequency Response 30Hz - 20KHz
Sensitivity -42.5dB +/- 3dB at 1 KHz (OdB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 68dB(A)
Maximum Sound Pressure Level 120db at 1KHz 1% T.H.D.
Power Requirements 9 - 48 volts phantom power
Termination Open ended termination. Fixing is via M10 x 1 Thread with shake proof washer and nut
Finish Satin Nickel

Architects and engineer specifications
The condenser microphone is a very low profile boundary layer through table design, with an omnidirectional polar pattern. The microphone has a unique ability to retract and lock the capsule module away from sight leaving only 3 mm (0.12”) protruding on top of the table. The microphone is of a robust brass construction and include 2 Metres (6.6ft) of cable. The microphone includes an integral phantom power module which is to be powered by 9 to 48 volts. The phantom power module also includes filters which will eliminate all GSM frequencies from 800-1200 MHz Impedance 200 Ohms; Frequency response 30 Hz to 20 KHz; Sensitivity -42.5dB ± 3dB @ 1Khz (0dB =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%. Finish: Satin Nickel

Scrie un comentariu

Numele dumneavoastra:


Comentariul dumneavoastra: Nota: codul HTML nu este interpretat!

Evaluare: Rau            Bun

Introduceti codul din casuta alaturata: