Marca: Community
Cod produs: Community-DP-6
Pret: 2.397RON (TVA inclus)
Fara TVA: 2.014RON
Cant.:  Adauga in cos
   - SAU -   
A new full-range 8-inch pendant loudspeaker joins the 6.5-inch DP6 in the Distributed Design Series.  The new high performance DP8, utilizing identical components as the D8 ceiling model and DS8 surface mount, offers the same great sound quality and excellent intelligibility as its Distributed Design counterparts. Like all Distributed Design loudspeakers, the DP8 pendant mount system features the same uniform voicing employed throughout the encore family of D-Series ceiling, surface, architectural and pendant mount systems, allowing multiple models to be combined in the same installation without compromising  consistency from zone to zone. 
The DP6 and DP8 is equipped with a built-in 120W autoformer, allowing the full loudspeaker output to be realized with 70V  or  100V  distribution  lines.  An easily accessible selector switch on the face of the loudspeaker makes it simple to choose between 8 ohm or 70V/100V operation, while the integrated rear cover conceals wiring and hanging hardware for a clean, aesthetically pleasing installation. Two 15-foot high tensile galvanized steel wire rope suspension cables with integrated spring clips are included.
Loudspeaker Type: Two-way, full-range, coaxial pendant mount loudspeaker, 8 ohm or 70V/100V operation
Operating Range: 65 Hz - 22 kHz
Frequency Response: 80 Hz - 20 kHz (±5 dB)
Max Input Ratings (8 ohm): 100W continuous, 250W program
28 volts RMS, 63 volts momentary peak
Transformer Taps - 70V:
60W, 30W, 15W, 7.5W and low impedance
60W, 30W, 15W
Distortion - 10% Full Power:
500 Hz
2 kHz
8 kHz
2nd Harmonic
3rd Harmonic
Sensitivity (1W/1m): 94 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
92 dB SPL (250 Hz to 4 kHz speech range)
Maximum Output: 114 dB SPL / 120 dB SPL (peak 8 ohm)
Nominal Impedance: 8 ohms
Minimum Impedance: 6.9 ohms @ 210 Hz
Nominal Coverage: 115º conical (1 kHz to 6 kHz)
125º conical (500 Hz to 6 kHz)
Axial Q / DI: 4.7 / 6.7, 500 Hz to 6 kHz
Crossover Frequency: 1.2 kHz
Recommended Signal Processing: 65 Hz high pass filter
Drivers: LF 1 x 6.5-inch
HF 1 x 1-inch exit compression driver
Driver Protection: Self-resetting solid state circuit breaker
Input Connection: Two 2-position Phoenix connectors
Controls: Front-face wattage / low impedance selector switch
Enclosure: UL 94V-0 rated ABS plastic, matte finish, paintable
Finish: Black or white
Mounting/Rigging Provisions: Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft
(4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring
clips for attaching the cable to the loudspeaker bracket and Gripple™ brand adjustable height cable
Grille: Powder coated steel with safety line, black or white finish, paintable
Baffle: Reflex loaded UL 94V-0 rated ABS
Safety Features: Included safety cable. Each cable has an SWL of 99 lbs (45 kg).
Safety Agency Ratings: ETL listed to comply with UL1480 and CSA60065.
Suspension system and Gripple™ brand cable fastener listed per UL1598 and UL2239, TUV and CSA
Class 3426-01 and Class 3426-81.
Required Accessories: Electronic high pass filter
Supplied Accessories: Two PHK-15 pendant hang kits
Enclosure ABS plastic rear cover
Rear cover ingress weather plug
Optional Accessories: PHK-30 30ft (9.1m) pendant hang kit
PHK-50 50ft (15.2m) pendant hang kit
PSC replacement Gripple™ speed clamp
PST-14 trimmable 14ft (4.3m) decorative split loom tubing
Dimensions - Height:
14.732 inches (374.2 mm) high enclosure
11.22 inches (285 mm) face diameter
Weight: 11.8 lbs (5.4 kg) 


Scrie un comentariu

Numele dumneavoastra:

Comentariul dumneavoastra: Nota: codul HTML nu este interpretat!

Evaluare: Rau            Bun

Introduceti codul din casuta alaturata:

Etichete: Community, DP, 6, boxa, suspendata,