Clockaudio CRM 100N-RF Microfon Omnidirectional
Fara TVA: 1.855RON
Clockaudio CRM 100N-RF
Microfon condenser omnidirectional, se monteaza in masa si contine un mecanism ce permite ascunderea lui, fara demontare.
Boundary layer through table Omni-Directional condenser microphone. Contains inbuilt mechanism that will allow the microphone to disappear without having to physically remove it from the table.
- Easy to install
- Low profile at surface level
- Unique ability to lock capsule away from sight when not in use
- Designed for remote switching
- Robust brass construction
- Omnidirectional polar pattern
- Built-in RF filter
- Balanced output
- Phantom power module supplied
- Supplied with 2m (6.6 ft) 2 core + screen cable
- Satin Nickel finish
Dimensions Above Table:15.00mm (0.59") Diameter:36.00mm (1.42") Below Table:111.00mm (4.37") Diameter:30.00mm (1.18")
Application Designed for simple installion with professional sound response. For use in conferencing or security situations.
Type Condenser (back electret)
Polar Pattern Omnidirectional
Frequency Response 30Hz - 20KHz
Sensitivity -42.5dB +/- 3dB at 1 KHz (OdB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 68dB(A)
Maximum Sound Pressure Level 120db at 1KHz 1% T.H.D.
Power Requirements 9 - 48 volts phantom power
Termination Open ended termination. Fixing is via M10 x 1 Thread with shake proof washer and nut
Finish Satin Nickel
Architects and engineer specifications
The condenser microphone is a very low profile boundary layer through table design, with an omnidirectional polar pattern. The microphone has a unique ability to retract and lock the capsule module away from sight leaving only 3 mm (0.12”) protruding on top of the table. The microphone is of a robust brass construction and include 2 Metres (6.6ft) of cable. The microphone includes an integral phantom power module which is to be powered by 9 to 48 volts. The phantom power module also includes filters which will eliminate all GSM frequencies from 800-1200 MHz Impedance 200 Ohms; Frequency response 30 Hz to 20 KHz; Sensitivity -42.5dB ± 3dB @ 1Khz (0dB =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%. Finish: Satin Nickel
Scrie un comentariu
Numele dumneavoastra:Comentariul dumneavoastra: Nota: codul HTML nu este interpretat!
Evaluare: Rau Bun
Introduceti codul din casuta alaturata: